Gledhill Stainless Lite Slimline 60 Litre Direct
Manufacturer Code: ASL475D60
Now Discontinued
DISCONTINUED
Gledhill Stainless Lite Slimline Direct 60 Litre Unvented Cylinder
The Stainless Lite Slimline cylinders have been added to Gledhills range of Duplex stainless steel cylinders, to enable you to utilise those smaller storage areas.
The standard size Stainless Lite cylinders are 550mm in diameter but the new slimline range has a reduced diameter of 475mm. This now enables installers to fit the new cylinders into smaller properties or older homes where there are space limitations, and so increase the range of properties where the benefits of mains pressure hot water can be fitted.
The new range of Stainless Lite Slimline cylinders come in sizes from 60 litres to 210 litres in both indirect and direct versions. In addition, it also comes with a solar option in 180 litre and 210 litre sizes. This now means there will be a model to suit most homes.
The introduction of the Slimline solar range enables homeowners to not only upgrade to a Duplex stainless steel cylinder, but also have the added benefit of being able to utilise solar power to contribute to the heating of the store.
Properties that previously could not enjoy mains pressure hot water can now enjoy powerful, mains-pressure performance, incorporating high flow rate controls, ideal for multi bathroom homes, where baths fill very quickly.
The householder will still benefit from the high heat transfer corrugated tube giving 20% faster recovery than plain tubing, controlled stratification and minimal heat loss.
(Please note all slimline models come complete with an on-peak immersion and the 120-210 direct models also have an off-peak immersion.)
The Gledhill Stainless Lite is supplied complete with all the quality fittings you need:
• Immersion heater(s)
• Inlet control set
• 2 part zone valve (indirect)
• Benchmark Log Book
• Wiring centre (Indirect)
• 15mm/22mm tundish
• Dual thermostat (indirect)
• Expansion vessel
• Full installation /maintenance instructions
• Wall mounting bracket
• Temperature and pressure relief valve
• Expansion vessel hose
Please Note: This product incurs a £12.50 + VAT additional carriage charge due to weight and size
