Zip HydroTap MT2769Z7UK All in One Arc Boiling, Chilled and Sparkling 240/175 Brushed Gold
Manufacturer Code: MT2769Z7UK
| Other Available Finishes | ||
 |
 |
 |
| Bright Chrome | Brushed Nickel | Brushed Chrome |
 |
 |
 |
| Matt Black | Brushed Rose Gold | Gunmetal |
Zip HydroTap MT2769Z7UK All in One Arc Boiling, Chilled and Sparkling 240/175 Brushed Gold
| Single Under Bench Command Centre |
 |
| Full colour, interactive touch screen display |
| Brushed Gold Tap |
 |
| Stunning, All in one arc brushed gold Zip tap |
| Zip 0.2 Micron Filter |
 |
| Your first filter |
Available Extras
| Additional Zip 0.2 Micron Filter |
|
| Zip taps provide crystal clear, better-tasting water and the filter removes chlorine tastes, odours and impurities as tiny as one five-thousandth of a millimetre |
 |
| An average worker spends around 3 working days a year making cups of tea and waiting for kettles to boil. With no need to boil a kettle this time can be reduced by more than 50% |
 |
| The boiling, chilled and sparkling water is filtered as it passes through the tap to remove impurities and make your water as pure as possible |
 |
| You are only using the amount of water you need. The majority of people overfill a kettle each time they use it. Collectively this equates to a huge amount of Co2 waste |
|
1. Over a pre-existing sink - If you have a pre-existing sink with storage underneath for the control unit the tap can be installed directly on to that sink, utilising the existing sink for drainage of excess.
|
2. On a kitchen side or elsewhere in the kitchen (font required) - If you have somewhere else in mind adjacent to a sink or on another surface you will still be able to install but you will need to purchase the font. The font acts as drainage and the location you choose will need to be able to access your cold water pipes, as well as the wastewater pipes and electricity. |
How easy are they to install?
Zip is known for quality and ease of use, these taps were designed to be easy for plumbers to install and even easier for customers to use. If you have a plumber they shouldn't have any issue with installation and Zip also offer an installation service if you would prefer. Find out more about Zip installations
How often does the filter need changing?
The filter has a capacity of 6,813 litres and Zip recommends changing the internal 0.2 micron 93702 filter every 12 months if this limit isn't reached.
 |
Or |  |
| 6813 Litres | 12 Months |
How do I know when to change the filter?
The command centre has a filter change warning light that will illuminate when a filter change is recommended.
How easy are Zip filters to replace?
There is a very simple process to correctly replace the filter. Check out our - Guide to Replacing Your Zip HydroTap Filter
Do I need a Limescale filter?
For areas where water hardness is a problem, for example when the level is above 4 degrees Clark (60 parts per million CaCO3), we recommend the use of the Zip Professional range of high-performance Limescale Filtration Systems.
For more information on hard water areas and selecting a suitable limescale filter kit, check our guide Zip Taps - Do I Need A Limescale Filter?
Does the Zip MT2769Z7UK tap provide boiling water?
Yes, This tap is specifically designed to provide boiling water, If you require additional functionality there are alternative taps below.
|
Downloadable Literature |
||
|
|
|
|
|
|
|
|
|
|
Alternatives |
||
|
||
|
Zip HydroTap MT2714Z7UK All in One Arc Boiling and Chilled 240/175 Brushed Gold
|
|
|
Zip HydroTap MT2768Z7UK All in One Arc Boiling, Chilled and Sparkling 160/175 Brushed Gold
|
|
| Style | All In One Arc |
|---|---|
| Finish | Brushed Gold |
| Tap Functionality | Boiling, Chilled & Sparkling |
| Boiling per hour (cups) | 240 |
| Chilled Per Hour (cups) | 175 |
| Sparkling Per Hour (cups) | 175 |
| MPN | MT2769Z7UK |
| CE Approval | Yes |
| WRAS Approval | No |
| Finish | Brushed Gold |
| Water Connection | Hot & Cold Feed |
| Mixer Tap | Yes |
| Rotation | 180 Degree |
| Disability Options | No |
| Font Available | No |
| Installation Hole Cut Size | 50mm |
| Dispensing Height | 255mm |
| Country Of Origin | Australia |
| WEE Compliant | Yes |
| Height | 335mm |
| Width | 450mm |
| Depth | 470mm |
